Build video enc env

From M1Research

(Difference between revisions)
Jump to: navigation, search
(System prerequisites)
(MPEG4IP)
 
(71 intermediate revisions not shown)
Line 1: Line 1:
 +
Article mirrored  at [http://streaming411.com/wiki/index.php?title=Building_encoding_tools_from_scratch Building encoding tools from scratch] at [http://streaming411.com/wiki/ streaming411.com]
 +
== System prerequisites ==
== System prerequisites ==
Building packages required preinstalled system packages:
Building packages required preinstalled system packages:
-
*base development packages packages: nasm, gcc, gcc-c++, libtool, automake*, autoconf*, make, libstdc++-devel, glibc-devel subversion
+
*base development packages: nasm, gcc, gcc-c++, libtool, automake*, autoconf*, make, libstdc++-devel, glibc-devel, subversion
*development packages: alsa-lib-devel, SDL-devel, gtk+-devel, gtk2-devel, ncurses-devel
*development packages: alsa-lib-devel, SDL-devel, gtk+-devel, gtk2-devel, ncurses-devel
*wxWidgets support required additional packages: wxGTK-2.6.x, wxGTK-devel-2.6.x, wxGTK-gl-2.6.x ( you can find sources at [http://www.wxwidgets.org/ http://www.wxwidgets.org/], rpm could be found at [http://fedoraproject.org/wiki/Extras http://fedoraproject.org/wiki/Extras] or [http://freshrpms.net/ http://freshrpms.net/])
*wxWidgets support required additional packages: wxGTK-2.6.x, wxGTK-devel-2.6.x, wxGTK-gl-2.6.x ( you can find sources at [http://www.wxwidgets.org/ http://www.wxwidgets.org/], rpm could be found at [http://fedoraproject.org/wiki/Extras http://fedoraproject.org/wiki/Extras] or [http://freshrpms.net/ http://freshrpms.net/])
Line 23: Line 25:
== Software building ==
== Software building ==
 +
 +
=== a52dec ===
 +
liba52 - a free ATSC A/52 stream decoder [http://liba52.sourceforge.net/ http://liba52.sourceforge.net/]
 +
<pre>
 +
gzip -cd a52dec-0.7.4.tar.gz | tar xvf -
 +
cd a52dec-0.7.4
 +
./configure --prefix=/usr/local/enctools --enable-shared=yes
 +
make ; make install
 +
</pre>
 +
 +
=== amr ===
 +
Download amrwb and amrnb source from [http://www.penguin.cz/~utx/amr http://www.penguin.cz/~utx/amr]
 +
 +
Compile and install:
 +
<pre>
 +
bzip2 -cd amrnb-7.0.0.0.tar.bz2 | tar xf -
 +
cd amrnb-7.0.0.0
 +
./configure --prefix=/usr/local/enctools
 +
make ; make install
 +
cd ..
 +
 +
 +
bzip2 -cd amrwb-7.0.0.2.tar.bz2 | tar xf -
 +
cd amrwb-7.0.0.2
 +
./configure --prefix=/usr/local/enctools
 +
make ; make install
 +
cd ..
 +
</pre>
 +
 +
=== faac ===
 +
AAC endecoder library [http://www.audiocoding.com/modules/mydownloads/ http://www.audiocoding.com/modules/mydownloads/]
 +
<pre>
 +
gzip -cd faac-1.25.tar.gz | tar xf -
 +
cd faac
 +
</pre>
 +
To avoid warning during bootstrap:
 +
<pre>
 +
utoreconf: running: aclocal --force
 +
configure.in:10: warning: underquoted definition of MY_DEFINE
 +
  run info '(automake)Extending aclocal'
 +
  or see http://sources.redhat.com/automake/automake.html#Extending-aclocal</pre>
 +
and error during configuring:
 +
<pre>
 +
config.status: creating \
 +
.infig.status: error: cannot find input file: \</pre>
 +
Apply patches discussed in [http://www.audiocoding.com/modules/newbb/viewtopic.php?topic_id=537&forum=3 audiocoding forum]:
 +
*[[media:faac.bootstrap.patch]]
 +
<pre>
 +
diff -uNr faac.origin/configure.in faac/configure.in
 +
--- faac.origin/configure.in    2006-08-13 17:17:26.000000000 +0300
 +
+++ faac/configure.in  2007-04-17 14:14:38.000000000 +0300
 +
@@ -7,7 +7,7 @@
 +
 +
AC_ARG_WITH( mp4v2,  [  --with-mp4v2            compile libmp4v2],WITHMP4V2=$withval, WITHMP4V2=yes)
 +
 +
-AC_DEFUN(MY_DEFINE, [ AC_DEFINE($1, 1, [define if needed]) ])
 +
+AC_DEFUN([MY_DEFINE], [ AC_DEFINE($1, 1, [define if needed]) ])
 +
 +
CFLAGS=${CFLAGS:-"-O2 -Wall"}
 +
 +
@@ -66,6 +66,11 @@
 +
        #include <netinet/in.h>])
 +
AC_CHECK_MEMBERS(fpos_t.__pos,,, [#include <stdio.h>])
 +
 +
-AC_OUTPUT(common/Makefile common/mp4v2/Makefile \
 +
-          libfaac/Makefile frontend/Makefile \
 +
-          include/Makefile Makefile)
 +
+AC_CONFIG_FILES(common/Makefile)
 +
+AC_CONFIG_FILES(common/mp4v2/Makefile)
 +
+AC_CONFIG_FILES(libfaac/Makefile)
 +
+AC_CONFIG_FILES(frontend/Makefile)
 +
+AC_CONFIG_FILES(include/Makefile)
 +
+AC_CONFIG_FILES(Makefile)
 +
+
 +
+AC_OUTPUT</pre>
 +
*[[media:faac.pipe.patch]]
 +
<pre>
 +
diff -uNr faac.origin/frontend/main.c faac/frontend/main.c
 +
--- faac.origin/frontend/main.c 2004-12-08 13:07:17.000000000 +0200
 +
+++ faac/frontend/main.c        2007-04-17 14:45:01.000000000 +0300
 +
@@ -918,7 +918,15 @@
 +
    {
 +
#endif
 +
        /* open the aac output file */
 +
-        outfile = fopen(aacFileName, "wb");
 +
+        if(('-' == aacFileName[0])&&(0 == aacFileName[1]))
 +
+        {
 +
+            outfile = stdout;
 +
+        }
 +
+        else
 +
+        {
 +
+            outfile = fopen(aacFileName, "wb");
 +
+        };
 +
+
 +
        if (!outfile)
 +
        {
 +
            fprintf(stderr, "Couldn't create output file %s\n", aacFileName);</pre>
 +
Bootstrap, configure and compile:
 +
<pre>
 +
patch -p1 < faac.bootstrap.patch
 +
patch -p1 < faac.pipe.patch
 +
autoreconf -vif
 +
./configure --prefix=/usr/local/enctools --with-mp4v2
 +
make ; make install
 +
cd ..
 +
</pre>
 +
 +
=== faad2 ===
 +
AAC decoder library [http://www.audiocoding.com/modules/mydownloads/ http://www.audiocoding.com/modules/mydownloads/]
 +
<pre>
 +
gzip -cd faad2-2.5.tar.gz | tar xf -
 +
cd faad2
 +
mkdir -p plugins/bmp
 +
</pre>
 +
For successfull compile (avoid <b>conditional "HAVE_BMP" was never defined</b>) apply [[Media:faad2.no_beep_media_player.patch]] patch discussed in [http://www.audiocoding.com/modules/newbb/viewtopic.php?topic_id=487&forum=2 audiocoding forum]:
 +
<pre>
 +
diff -uNr faad2.origin/configure.in faad2/configure.in
 +
--- faad2.origin/configure.in  2006-08-13 17:13:31.000000000 +0300
 +
+++ faad2/configure.in  2007-04-16 19:31:20.000000000 +0300
 +
@@ -118,6 +118,9 @@
 +
  AC_DEFINE([HAVE_BMP], 1, [User wants beep media player plugin built])
 +
  AM_CONDITIONAL([HAVE_XMMS], true)
 +
  AM_CONDITIONAL([HAVE_BMP], true)
 +
+else
 +
+ AC_MSG_NOTICE(no bmp build configured)
 +
+ AM_CONDITIONAL([HAVE_BMP], false)
 +
fi
 +
 +
if test x$WITHDRM = xyes; then
 +
</pre>
 +
And now you can bootstrap (ignore warnings) and compile:
 +
<pre>
 +
patch -p1 < faad2.no_beep_media_player.patch
 +
autoreconf -vif
 +
./configure --prefix=/usr/local/enctools
 +
make ; make install
 +
cd ..
 +
</pre>
=== lame ===
=== lame ===
-
An MP3 encoder and graphical frame analyzer. [http://freshmeat.net/projects/lame/ http://freshmeat.net/projects/lame/]
+
An MP3 encoder and graphical frame analyzer. [http://lame.sourceforge.net/ http://lame.sourceforge.net/]
<pre>
<pre>
-
gzip -cd lame-3.97b2.tar.gz | tar xvf -
+
gzip -cd lame-3.97.tar.gz | tar xvf -
cd lame-3.97
cd lame-3.97
./configure --prefix=/usr/local/enctools
./configure --prefix=/usr/local/enctools
Line 47: Line 187:
Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free, general-purpose compressed audio format [http://www.xiph.org/vorbis/ http://www.xiph.org/vorbis/]
Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free, general-purpose compressed audio format [http://www.xiph.org/vorbis/ http://www.xiph.org/vorbis/]
<pre>
<pre>
-
gzip -cd libvorbis-1.1.2.tar.gz | tar xvf -
+
gzip -cd libvorbis-1.2.0.tar.gz | tar xvf -
-
cd libvorbis-1.1.2
+
cd libvorbis-1.2.0
-
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/enctools/lib ./configure --prefix=/usr/local/enctools
+
./configure --with-ogg=/usr/local/enctools --prefix=/usr/local/enctools
make ; make install
make ; make install
cd ..
cd ..
Line 57: Line 197:
Video codec [http://theora.org/ http://theora.org/]
Video codec [http://theora.org/ http://theora.org/]
<pre>
<pre>
-
gzip -cd libtheora-1.0alpha6.tar.gz | tar xvf -
+
gzip -cd libtheora-1.0beta1.tar.gz | tar xvf -
-
cd libtheora-1.0alpha6
+
cd libtheora-1.0beta1
./configure --prefix=/usr/local/enctools --with-ogg=/usr/local/enctools --with-vorbis=/usr/local/enctools
./configure --prefix=/usr/local/enctools --with-ogg=/usr/local/enctools --with-vorbis=/usr/local/enctools
make ; make install
make ; make install
Line 64: Line 204:
</pre>
</pre>
-
=== flac ===
+
=== x264 ===
-
Free Lossless Audio Codec [http://flac.sourceforge.net/ http://flac.sourceforge.net/]
+
x264 - a free h264/avc encoder [http://developers.videolan.org/x264.html http://developers.videolan.org/x264.html]
 +
Download SVN snapshot:
<pre>
<pre>
-
gzip -cd flac-1.1.2.tar.gz | tar xvf -
+
svn co svn://svn.videolan.org/x264/trunk x264
-
cd flac-1.1.2
+
</pre>
-
./configure --prefix=/usr/local/enctools --with-ogg=/usr/local/enctools
+
Configure and compile (do not forget about <code>--enable-pthread</code>)
 +
<pre>
 +
cd x264
 +
./configure --prefix=/usr/local/enctools --enable-shared --enable-pthread
make ; make install
make ; make install
cd ..
cd ..
</pre>
</pre>
-
=== speex ===
+
=== xvidcore ===
-
Speex is an Open Source/Free Software  patent-free audio compression format designed for speech. The Speex Project aims to lower the barrier of entry for voice applications by providing a free alternative to expensive proprietary speech codecs. Moreover, Speex is well-adapted to Internet applications and provides useful features that are not present in most other codecs. Finally, Speex is part of the GNU  Project and is available under the Xiph.org variant of the BSD license. [http://speex.org/ http://speex.org/]
+
XviD is an ISO MPEG-4 compliant video codec, so designed to compress/decompress digital video. It's a open source project, which is developed and maintained by a handful of skilled and interested engineers from all over the world. [http://www.xvid.org/ http://www.xvid.org/]
<pre>
<pre>
-
gzip -cd speex-1.0.5.tar.gz | tar xvf -
+
gzip -cd xvidcore-1.1.3.tar.gz | tar xvf -
-
cd speex-1.0.5
+
cd xvidcore-1.1.3
-
./configure --prefix=/usr/local/enctools --with-ogg-dir=/usr/local/enctools
+
cd build/generic
 +
./configure --prefix=/usr/local/enctools
make ; make install
make ; make install
cd ..
cd ..
</pre>
</pre>
-
=== faad2 ===
+
=== ffmpeg ===
-
AAC decoder library [http://www.audiocoding.com/modules/mydownloads/ http://www.audiocoding.com/modules/mydownloads/]
+
FFmpeg is a complete solution to record, convert and stream audio and video. It includes libavcodec, the leading audio/video codec library. [http://ffmpeg.mplayerhq.hu/ http://ffmpeg.mplayerhq.hu/]
-
FC4,FC5 required patch for compiling package faad2.mp4ff_track_add.patch
+
Request a ffmpeg svn snapshot (this moment i have r10593):
<pre>
<pre>
-
diff -uNr faad2.origin/common/mp4ff/mp4ffint.h faad2/common/mp4ff/mp4ffint.h
+
svn co svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg</pre>
-
--- faad2.origin/common/mp4ff/mp4ffint.h        2004-04-12 21:17:42.000000000 +0300
+
 
-
+++ faad2/common/mp4ff/mp4ffint.h      2006-06-22 21:11:14.000000000 +0300
+
Configuring procedure:
-
@@ -345,7 +345,7 @@
+
 
-
mp4ff_t *mp4ff_open_edit(mp4ff_callback_t *f);
+
-
#endif
+
-
void mp4ff_close(mp4ff_t *ff);
+
-
-void mp4ff_track_add(mp4ff_t *f);
+
-
+/*void mp4ff_track_add(mp4ff_t *f); */
+
-
int32_t parse_sub_atoms(mp4ff_t *f, const uint64_t total_size,int meta_only);
+
-
int32_t parse_atoms(mp4ff_t *f,int meta_only);
+
-
</pre>
+
-
Compilation process:
+
<pre>
<pre>
-
mkdir faad2
+
cd ffmpeg
-
cd faad2
+
 
-
gzip -cd ../faad2-15092004.tar.gz | tar xvf -
+
PATH=$PATH:/usr/local/enctools/bin \
-
patch -p1 < ../faad2.mp4ff_track_add.patch
+
./configure          \
-
autoreconf -vif
+
--prefix=/usr/local/enctools \
-
./configure --prefix=/usr/local/enctools --with-mp4v2
+
--enable-liba52      \
 +
--enable-libamr_nb  \
 +
--enable-libamr_wb  \
 +
--enable-libfaac    \
 +
--enable-libfaad    \
 +
--enable-libmp3lame  \
 +
--enable-libogg      \
 +
--enable-libvorbis  \
 +
--enable-libtheora  \
 +
--enable-libxvid    \
 +
--enable-libx264    \
 +
--enable-gpl        \
 +
--enable-pp          \
 +
--enable-shared      \
 +
--enable-pthreads    \
 +
--extra-cflags="-I/usr/local/enctools/include" \
 +
--extra-ldflags="-L/usr/local/enctools/lib"
 +
 
make ; make install
make ; make install
cd ..
cd ..
</pre>
</pre>
-
=== faac ===
+
=== libmad ===
-
AAC endecoder library [http://www.audiocoding.com/modules/mydownloads/ http://www.audiocoding.com/modules/mydownloads/]
+
A high-quality MPEG audio decoder. [http://freshmeat.net/projects/libmad/ http://freshmeat.net/projects/libmad/]
<pre>
<pre>
-
gzip -cd faac-18102004.tar.gz | tar xvf -
+
gzip -cd libmad-0.15.1b.tar.gz | tar xvf -
-
cd faac
+
cd libmad-0.15.1b
-
autoreconf -vif
+
./configure --prefix=/usr/local/enctools
-
./configure --prefix=/usr/local/enctools --with-mp4v2
+
make ; make install
make ; make install
cd ..
cd ..
</pre>
</pre>
-
=== xvidcore ===
+
=== libmpeg2 ===
-
XviD is an ISO MPEG-4 compliant video codec, so designed to compress/decompress digital video. It's a open source project, which is developed and maintained by a handful of skilled and interested engineers from all over the world. [http://www.xvid.org/ http://www.xvid.org/]
+
libmpeg2 - a free MPEG-2 video stream decoder. [http://libmpeg2.sourceforge.net/ http://libmpeg2.sourceforge.net/]
<pre>
<pre>
-
gzip -cd xvidcore-1.1.0.tar.gz | tar xvf -
+
gzip -cd mpeg2dec-0.4.1.tar.gz | tar xvf -
-
cd xvidcore-1.1.0
+
cd mpeg2dec-0.4.1
-
cd build/generic
+
./configure --prefix=/usr/local/enctools
./configure --prefix=/usr/local/enctools
-
make ; make install
+
make
 +
make install
cd ..
cd ..
</pre>
</pre>
-
=== x264 ===
+
=== flac ===
-
x264 - a free h264/avc encoder [http://developers.videolan.org/x264.html http://developers.videolan.org/x264.html]
+
Free Lossless Audio Codec [http://flac.sourceforge.net/ http://flac.sourceforge.net/]
<pre>
<pre>
-
bzip2 -cd x264-snapshot-20060619-2245.tar.bz2 | tar xvf -
+
gzip -cd flac-1.2.1.tar.gz | tar xvf -
-
cd x264-snapshot-20060619-2245
+
cd flac-1.2.1
-
./configure --prefix=/usr/local/enctools --enable-shared
+
./configure --prefix=/usr/local/enctools --with-ogg=/usr/local/enctools
make ; make install
make ; make install
cd ..
cd ..
</pre>
</pre>
-
=== a52dec ===
+
=== speex ===
-
liba52 - a free ATSC A/52 stream decoder [http://liba52.sourceforge.net/ http://liba52.sourceforge.net/]
+
Speex is an Open Source/Free Software  patent-free audio compression format designed for speech. The Speex Project aims to lower the barrier of entry for voice applications by providing a free alternative to expensive proprietary speech codecs. Moreover, Speex is well-adapted to Internet applications and provides useful features that are not present in most other codecs. Finally, Speex is part of the GNU  Project and is available under the Xiph.org variant of the BSD license. [http://speex.org/ http://speex.org/]
<pre>
<pre>
-
gzip -cd a52dec-0.7.4.tar.gz | tar xvf -
+
gzip -cd speex-1.2beta2.tar.gz | tar xvf -
-
cd a52dec-0.7.4
+
cd speex-1.2beta2
-
./configure --prefix=/usr/local/enctools
+
./configure --prefix=/usr/local/enctools --with-ogg-dir=/usr/local/enctools
make ; make install
make ; make install
 +
cd ..
</pre>
</pre>
Line 157: Line 310:
Quasar DV Codec: libdv [http://libdv.sourceforge.net/ http://libdv.sourceforge.net/]
Quasar DV Codec: libdv [http://libdv.sourceforge.net/ http://libdv.sourceforge.net/]
<pre>
<pre>
-
gzip -cd libdv-0.104.tar.gz | tar xvf -
+
gzip -cd libdv-1.0.0.tar.gz | tar xvf -
-
cd libdv-0.104
+
cd libdv-1.0.0
./configure --disable-gtk --disable-xv --prefix=/usr/local/enctools
./configure --disable-gtk --disable-xv --prefix=/usr/local/enctools
make ; make install
make ; make install
Line 170: Line 323:
cd libraw1394-1.2.1
cd libraw1394-1.2.1
./configure --prefix=/usr/local/enctools
./configure --prefix=/usr/local/enctools
-
make ; make install
 
-
cd ..
 
-
</pre>
 
-
 
-
=== libdc1394 ===
 
-
libdc1394 is a library that is intended to provide a high level programming interface for application developers who wish to control IEEE 1394 based cameras that conform to the 1394-based Digital Camera Specification [http://sourceforge.net/projects/libdc1394 http://sourceforge.net/projects/libdc1394]
 
-
 
-
To avoid <code>'CLK_TCK' undeclared</code> error message during compiling we should apply patch <code>libdc1394-1.2.1.CLOCKS_PER_SEC.patch</code><pre>
 
-
diff -uNr libdc1394-1.2.1.origin/examples/grab_partial_image.c libdc1394-1.2.1/examples/grab_partial_image.c
 
-
--- libdc1394-1.2.1.origin/examples/grab_partial_image.c        2005-08-18 03:03:06.000000000 -0400
 
-
+++ libdc1394-1.2.1/examples/grab_partial_image.c      2006-06-29 12:09:12.000000000 -0400
 
-
@@ -218,7 +218,7 @@
 
-
    /*---------------------------------------------------------------------
 
-
      *  output elapsed time
 
-
      *---------------------------------------------------------------------*/
 
-
-    elapsed_time = (float)(times(&tms_buf) - start_time) / CLK_TCK;
 
-
+    elapsed_time = (float)(times(&tms_buf) - start_time) / CLOCKS_PER_SEC;
 
-
    printf( "got frame %d. elapsed time: %g sec ==> %g frames/second\n",
 
-
            i, elapsed_time, (float)i / elapsed_time);
 
-
  }
 
-
</pre>
 
-
 
-
Building process:
 
-
 
-
<pre>
 
-
gzip -cd libdc1394-1.2.1.tar.gz | tar xvf -
 
-
cd libdc1394-1.2.1
 
-
 
-
patch -p1 < ../libdc1394-1.2.1.CLOCKS_PER_SEC.patch
 
-
 
-
CPPFLAGS="-I/usr/local/enctools/include/"; export CPPFLAGS
 
-
CFLAGS="-I/usr/local/enctools/include/"; export CFLAGS
 
-
LDFLAGS="-L/usr/local/enctools/lib/"; export LDFLAGS
 
-
./configure --prefix=/usr/local/enctools
 
-
 
make ; make install
make ; make install
cd ..
cd ..
Line 221: Line 339:
</pre>
</pre>
-
=== ffmpeg ===
 
-
FFmpeg is a complete solution to record, convert and stream audio and video. It includes libavcodec, the leading audio/video codec library. [http://ffmpeg.mplayerhq.hu/ http://ffmpeg.mplayerhq.hu/]
 
-
 
-
Compiling required patch <code>ffmpeg.faad2.faacDecOpen-NeAACDecOpen.patch</code> due to faac namespace change (faacDecOpen -> NeAACDecOpen):
 
-
<pre>
 
-
diff -uNr ffmpeg.origin/configure ffmpeg/configure
 
-
--- ffmpeg.origin/configure    2006-06-20 15:51:34.000000000 +0300
 
-
+++ ffmpeg/configure    2006-06-23 00:40:54.000000000 +0300
 
-
@@ -1178,7 +1178,7 @@
 
-
enabled libogg  && require libogg ogg/ogg.h ogg_sync_init -logg
 
-
enabled vorbis  && require libvorbis vorbis/vorbisenc.h vorbis_info_init -lvorbis -lvorbisenc
 
-
enabled theora  && require libtheora theora/theora.h theora_info_init -ltheora
 
-
-enabled faad    && require libfaad faad.h faacDecOpen -lfaad
 
-
+enabled faad    && require libfaad faad.h NeAACDecOpen -lfaad
 
-
enabled xvid    && require XviD xvid.h xvid_global -lxvidcore
 
-
enabled x264    && require x264 x264.h x264_encoder_open -lx264
 
-
enabled dc1394  && require libdc1394 libdc1394/dc1394_control.h dc1394_create_handle -ldc1394_control -lraw1394
 
-
</pre>
 
-
 
-
Configuring procedure:
 
-
<pre>
 
-
bzip2 -cd ffmpeg-r5504.tar.bz2 | tar xvf -
 
-
cd ffmpeg
 
-
 
-
patch -p1 < ../ffmpeg.faad2.faacDecOpen-NeAACDecOpen.patch
 
-
 
-
PATH=$PATH:/usr/local/enctools/bin ./configure --prefix=/usr/local/enctools \
 
-
--enable-mp3lame --enable-libogg --enable-vorbis --enable-theora \
 
-
--enable-faad --enable-faadbin --enable-faac --enable-xvid --enable-x264 \
 
-
--enable-a52 --enable-a52bin --enable-amr_nb --enable-amr_wb --enable-dc1394 \
 
-
--enable-gpl --enable-pp --enable-shared \
 
-
--extra-cflags="-I/usr/local/enctools/include" --extra-ldflags="-L/usr/local/enctools/lib"
 
-
</pre>
 
-
AMR support required additional sources - ffmpeg writes some notes about this:
 
-
<pre>
 
-
AMR WB FLOAT NOTICE ! Make sure you have downloaded TS26.204
 
-
V5.1.0 from
 
-
http://www.3gpp.org/ftp/Specs/archive/26_series/26.204/26204-510.zip
 
-
and extracted the source to libavcodec/amrwb_float
 
-
 
-
AMR NB FLOAT NOTICE ! Make sure you have downloaded TS26.104
 
-
REL-5 V5.1.0 from
 
-
http://www.3gpp.org/ftp/Specs/archive/26_series/26.104/26104-510.zip
 
-
and extracted the source to libavcodec/amr_float
 
-
If you try this on alpha, you may need to change Word32 to int in amr/typedef.h
 
-
</pre>
 
-
 
-
Download theese files and put into source contribution directory, put the source into mentioned place:
 
-
<pre>
 
-
mkdir -p libavcodec/amrwb_float
 
-
unzip ../26204-510.zip -d libavcodec/amrwb_float
 
-
unzip libavcodec/amrwb_float/26204-510_ANSI-C_source_code.zip -d libavcodec/amrwb_float
 
-
 
-
mkdir -p libavcodec/amr_float
 
-
unzip ../26104-510.zip -d libavcodec/amr_float
 
-
unzip libavcodec/amr_float/26104-510_ANSI_C_source_code.zip -d libavcodec/amr_float
 
-
</pre>
 
-
 
-
After you put amr sources start ffmpeg building:
 
-
<pre>
 
-
make ; make install
 
-
cd ...
 
-
</pre>
 
=== live555 ===
=== live555 ===
LIVE555 Streaming Media (rtsp, rtp support) [http://live555.com/liveMedia/ http://live555.com/liveMedia/]
LIVE555 Streaming Media (rtsp, rtp support) [http://live555.com/liveMedia/ http://live555.com/liveMedia/]
<pre>
<pre>
-
gzip -cd live.2006.05.17.tar.gz | tar xvf -
+
gzip -cd live.2007.08.03a.tar.gz | tar xf -
cd live
cd live
./genMakefiles linux
./genMakefiles linux
Line 294: Line 349:
cd ..
cd ..
</pre>
</pre>
-
 
+
folder <code>live</code> - it will be used by VLC in next step
-
=== libmad ===
+
-
A high-quality MPEG audio decoder. [http://freshmeat.net/projects/libmad/ http://freshmeat.net/projects/libmad/]
+
-
<pre>
+
-
gzip -cd libmad-0.15.1b.tar.gz | tar xvf -
+
-
cd libmad-0.15.1b
+
-
./configure --prefix=/usr/local/enctools
+
-
make ; make install
+
-
cd ..
+
-
</pre>
+
-
 
+
-
=== libmpeg2 ===
+
-
libmpeg2 - a free MPEG-2 video stream decoder. [http://libmpeg2.sourceforge.net/ http://libmpeg2.sourceforge.net/]
+
-
<pre>
+
-
gzip -cd mpeg2dec-0.4.0b.tar.gz | tar xvf -
+
-
cd mpeg2dec-0.4.0
+
-
./configure --prefix=/usr/local/enctools
+
-
make
+
-
make install
+
-
cd ..
+
-
</pre>
+
-
 
+
-
=== fribidi ===
+
-
GNU FriBidi is an implementation of the [WWW]Unicode Bidirectional Algorithm (bidi). [http://fribidi.org/wiki/ http://fribidi.org/wiki/]
+
-
<pre>
+
-
gzip -cd fribidi-0.10.7.tar.gz | tar xvf -
+
-
cd fribidi-0.10.7
+
-
./configure --prefix=/usr/local/enctools
+
-
make ; make install
+
-
cd ..
+
-
</pre>
+
=== VLC ===
=== VLC ===
Line 333: Line 358:
/* typedef u_int8_t  byte_t; */
/* typedef u_int8_t  byte_t; */
--skipped--</pre>  
--skipped--</pre>  
 +
 +
<pre>
 +
bzip2 -cd vlc-0.8.6c.tar.bz2 | tar xvf -
 +
cd vlc-0.8.6c
 +
</pre>
Building procedure:
Building procedure:
<pre>
<pre>
-
bzip2 -cd vlc-0.8.5.tar.bz2 | tar xvf -
 
-
cd vlc-0.8.5
 
-
 
CPPFLAGS="-I/usr/local/enctools/include/"; export CPPFLAGS
CPPFLAGS="-I/usr/local/enctools/include/"; export CPPFLAGS
CFLAGS="-I/usr/local/enctools/include/"; export CFLAGS
CFLAGS="-I/usr/local/enctools/include/"; export CFLAGS
LDFLAGS="-L/usr/local/enctools/lib/"; export LDFLAGS
LDFLAGS="-L/usr/local/enctools/lib/"; export LDFLAGS
 +
PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/local/enctools/lib/pkgconfig ; export PKG_CONFIG_PATH
 +
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/enctools/lib ; export LD_LIBRARY_PATH
-
./configure  --prefix=/usr/local/enctools \
+
./configure  \
 +
--prefix=/usr/local/enctools \
--enable-dv \
--enable-dv \
-
--enable-livedotcom --with-livedotcom-tree=../live \
+
--enable-live555 --with-live555-tree=../live \
--enable-v4l \
--enable-v4l \
--enable-ogg --enable-mad --enable-faad --enable-a52 --enable-flac \
--enable-ogg --enable-mad --enable-faad --enable-a52 --enable-flac \
--enable-libmpeg2 --enable-vorbis --enable-speex --enable-theora \
--enable-libmpeg2 --enable-vorbis --enable-speex --enable-theora \
--enable-png --enable-x264 \
--enable-png --enable-x264 \
-
--enable-freetype --enable-fribidi --enable-libxml2 \
 
--enable-ffmpeg --with-ffmpeg-mp3lame --with-ffmpeg-faac \
--enable-ffmpeg --with-ffmpeg-mp3lame --with-ffmpeg-faac \
--with-ffmpeg-vorbis --with-ffmpeg-theora --with-ffmpeg-ogg \
--with-ffmpeg-vorbis --with-ffmpeg-theora --with-ffmpeg-ogg \
Line 360: Line 389:
</pre>
</pre>
-
=== MPEG4IP ===
 
-
MPEG4IP: Open Source, Open Standards, Open Streaming. [http://www.mpeg4ip.net/ http://www.mpeg4ip.net/]
 
-
Alsa support propre linking require patch mpeg4ip.alsa_linking_fix.patch:
+
 
 +
=== twolame ===
 +
 
 +
TwoLAME is an optimised MPEG Audio Layer 2 (MP2) encoder based on tooLAME by Mike Cheng, which in turn is based upon the ISO dist10 code and portions of LAME. [http://www.twolame.org/ http://www.twolame.org/]
<pre>
<pre>
-
diff -uNr mpeg4ip-1.5.0.1.origin/server/mp4live/Makefile.am mpeg4ip-1.5.0.1/server/mp4live/Makefile.am
+
gzip -cd twolame-0.3.10.tar.gz | tar xf -
-
--- mpeg4ip-1.5.0.1.origin/server/mp4live/Makefile.am  2006-03-10 20:49:44.000000000 +0200
+
cd twolame-0.3.10
-
+++ mpeg4ip-1.5.0.1/server/mp4live/Makefile.am  2006-06-24 17:10:22.000000000 +0300
+
./configure --prefix=/usr/local/enctools
-
@@ -169,6 +169,7 @@
+
make ; make install
-
        @SRTPLIB@ \
+
cd ..
-
        -lpthread \
+
</pre>
-
        @SDL_LIBS@ $(GUILIBS) @FFMPEG_LIB@ @LIBVORBIS_LIB@ $(XVID_LIB) \
+
-
+      @ALSA_LIBS@ \
+
-
        @X264_LIB@
+
-
EXTRA_DIST = $(ed2) video_v4l_source.cpp
+
=== MPEG4IP ===
-
diff -uNr mpeg4ip-1.5.0.1.origin/server/mp4live/Makefile.in mpeg4ip-1.5.0.1/server/mp4live/Makefile.in
+
MPEG4IP: Open Source, Open Standards, Open Streaming. [http://www.mpeg4ip.net/ http://www.mpeg4ip.net/]
-
--- mpeg4ip-1.5.0.1.origin/server/mp4live/Makefile.in  2006-06-08 22:17:46.000000000 +0300
+
-
+++ mpeg4ip-1.5.0.1/server/mp4live/Makefile.in  2006-06-24 17:10:12.000000000 +0300
+
-
@@ -482,6 +482,7 @@
+
-
        @SRTPLIB@ \
+
-
        -lpthread \
+
-
        @SDL_LIBS@ $(GUILIBS) @FFMPEG_LIB@ @LIBVORBIS_LIB@ $(XVID_LIB) \
+
-
+      @ALSA_LIBS@ \
+
-
        @X264_LIB@
+
-
EXTRA_DIST = $(ed2) video_v4l_source.cpp
+
Request sources from CVS
 +
<pre>
 +
cvs -d:pserver:anonymous@mpeg4ip.cvs.sourceforge.net:/cvsroot/mpeg4ip login
 +
cvs -z3 -d:pserver:anonymous@mpeg4ip.cvs.sourceforge.net:/cvsroot/mpeg4ip co -P mpeg4ip
</pre>
</pre>
Configuring procedure:
Configuring procedure:
Line 394: Line 416:
LDFLAGS="-L/usr/local/enctools/lib/"; export LDFLAGS
LDFLAGS="-L/usr/local/enctools/lib/"; export LDFLAGS
-
gzip -cd mpeg4ip-1.5.0.1.tar.gz | tar xvf -
+
cd mpeg4ip
-
cd mpeg4ip-1.5.0.1
+
-
patch -p1 < ../mpeg4ip.alsa_linking_fix.patch
+
./bootstrap                  \
 +
--prefix=/usr/local/enctools  \
 +
--enable-ffmpeg              \
 +
--enable-mp4live              \
 +
--enable-player              \
 +
--enable-server              \
 +
--enable-igmpv3              \
 +
--disable-id3tags
-
./bootstrap  --prefix=/usr/local/enctools \
 
-
--enable-server \
 
-
--enable-player \
 
-
--enable-mp4live \
 
-
--enable-mp4live-alsa \
 
-
--enable-ffmpeg
 
</pre>
</pre>
After configuring mpeg4ip reports:<pre>
After configuring mpeg4ip reports:<pre>
Line 412: Line 434:
     x264 encoder is installed
     x264 encoder is installed
     lame encoder is installed
     lame encoder is installed
-
     faac encoder is installed </pre>
+
     faac encoder is installed
 +
    twolame encoder is installed</pre>
Build mpeg4ip:
Build mpeg4ip:
<pre>make ; make install; cd .. </pre>
<pre>make ; make install; cd .. </pre>
 +
 +
== Built binaries ==
 +
* [http://research.m1stereo.tv/downloads/enctools-20070419.bin.tar.bz2 bzip-ed binaries] build from 20070419 (33.6Mb)
 +
* [http://research.m1stereo.tv/downloads/enctools-20070404.bin.tar.bz2 bzip-ed binaries] build from 20070404 (27.7Mb)

Latest revision as of 13:35, 27 September 2007

Article mirrored at Building encoding tools from scratch at streaming411.com

Contents

System prerequisites

Building packages required preinstalled system packages:

  • base development packages: nasm, gcc, gcc-c++, libtool, automake*, autoconf*, make, libstdc++-devel, glibc-devel, subversion
  • development packages: alsa-lib-devel, SDL-devel, gtk+-devel, gtk2-devel, ncurses-devel
  • wxWidgets support required additional packages: wxGTK-2.6.x, wxGTK-devel-2.6.x, wxGTK-gl-2.6.x ( you can find sources at http://www.wxwidgets.org/, rpm could be found at http://fedoraproject.org/wiki/Extras or http://freshrpms.net/)

I choose path /usr/local/enctools for storing all builded files to avoid confilcts with other libs.

Make sure your PATH contains /usr/local/enctools/bin, to update path :

PATH=$PATH:/usr/local/enctools/bin; export PATH
Include libraries path to /etc/ld.so.conf:
--skipped--
/usr/local/enctools/lib
--skipped--

After adding path rebuild ld.so.cache:

ldconfig

Software building

a52dec

liba52 - a free ATSC A/52 stream decoder http://liba52.sourceforge.net/

gzip -cd a52dec-0.7.4.tar.gz | tar xvf -
cd a52dec-0.7.4
./configure --prefix=/usr/local/enctools --enable-shared=yes
make ; make install

amr

Download amrwb and amrnb source from http://www.penguin.cz/~utx/amr

Compile and install:

bzip2 -cd amrnb-7.0.0.0.tar.bz2 | tar xf -
cd amrnb-7.0.0.0
./configure --prefix=/usr/local/enctools
make ; make install
cd ..


bzip2 -cd amrwb-7.0.0.2.tar.bz2 | tar xf -
cd amrwb-7.0.0.2
./configure --prefix=/usr/local/enctools
make ; make install
cd ..

faac

AAC endecoder library http://www.audiocoding.com/modules/mydownloads/

gzip -cd faac-1.25.tar.gz | tar xf -
cd faac

To avoid warning during bootstrap:

utoreconf: running: aclocal --force
configure.in:10: warning: underquoted definition of MY_DEFINE
  run info '(automake)Extending aclocal'
  or see http://sources.redhat.com/automake/automake.html#Extending-aclocal

and error during configuring:

config.status: creating \
.infig.status: error: cannot find input file: \

Apply patches discussed in audiocoding forum:

diff -uNr faac.origin/configure.in faac/configure.in
--- faac.origin/configure.in    2006-08-13 17:17:26.000000000 +0300
+++ faac/configure.in   2007-04-17 14:14:38.000000000 +0300
@@ -7,7 +7,7 @@

 AC_ARG_WITH( mp4v2,  [  --with-mp4v2            compile libmp4v2],WITHMP4V2=$withval, WITHMP4V2=yes)

-AC_DEFUN(MY_DEFINE, [ AC_DEFINE($1, 1, [define if needed]) ])
+AC_DEFUN([MY_DEFINE], [ AC_DEFINE($1, 1, [define if needed]) ])

 CFLAGS=${CFLAGS:-"-O2 -Wall"}

@@ -66,6 +66,11 @@
         #include <netinet/in.h>])
 AC_CHECK_MEMBERS(fpos_t.__pos,,, [#include <stdio.h>])

-AC_OUTPUT(common/Makefile common/mp4v2/Makefile \
-          libfaac/Makefile frontend/Makefile \
-          include/Makefile Makefile)
+AC_CONFIG_FILES(common/Makefile)
+AC_CONFIG_FILES(common/mp4v2/Makefile)
+AC_CONFIG_FILES(libfaac/Makefile)
+AC_CONFIG_FILES(frontend/Makefile)
+AC_CONFIG_FILES(include/Makefile)
+AC_CONFIG_FILES(Makefile)
+
+AC_OUTPUT
diff -uNr faac.origin/frontend/main.c faac/frontend/main.c
--- faac.origin/frontend/main.c 2004-12-08 13:07:17.000000000 +0200
+++ faac/frontend/main.c        2007-04-17 14:45:01.000000000 +0300
@@ -918,7 +918,15 @@
     {
 #endif
         /* open the aac output file */
-        outfile = fopen(aacFileName, "wb");
+        if(('-' == aacFileName[0])&&(0 == aacFileName[1]))
+        {
+            outfile = stdout;
+        }
+        else
+        {
+            outfile = fopen(aacFileName, "wb");
+        };
+
         if (!outfile)
         {
             fprintf(stderr, "Couldn't create output file %s\n", aacFileName);

Bootstrap, configure and compile:

patch -p1 < faac.bootstrap.patch
patch -p1 < faac.pipe.patch
autoreconf -vif
./configure --prefix=/usr/local/enctools --with-mp4v2
make ; make install
cd ..

faad2

AAC decoder library http://www.audiocoding.com/modules/mydownloads/

gzip -cd faad2-2.5.tar.gz | tar xf -
cd faad2
mkdir -p plugins/bmp

For successfull compile (avoid conditional "HAVE_BMP" was never defined) apply Media:faad2.no_beep_media_player.patch patch discussed in audiocoding forum:

diff -uNr faad2.origin/configure.in faad2/configure.in
--- faad2.origin/configure.in   2006-08-13 17:13:31.000000000 +0300
+++ faad2/configure.in  2007-04-16 19:31:20.000000000 +0300
@@ -118,6 +118,9 @@
   AC_DEFINE([HAVE_BMP], 1, [User wants beep media player plugin built])
   AM_CONDITIONAL([HAVE_XMMS], true)
   AM_CONDITIONAL([HAVE_BMP], true)
+else
+ AC_MSG_NOTICE(no bmp build configured)
+ AM_CONDITIONAL([HAVE_BMP], false)
 fi

 if test x$WITHDRM = xyes; then

And now you can bootstrap (ignore warnings) and compile:

patch -p1 < faad2.no_beep_media_player.patch
autoreconf -vif
./configure --prefix=/usr/local/enctools
make ; make install
cd ..

lame

An MP3 encoder and graphical frame analyzer. http://lame.sourceforge.net/

gzip -cd lame-3.97.tar.gz | tar xvf -
cd lame-3.97
./configure --prefix=/usr/local/enctools
make; make install
cd ..

ogg

Ogg is a multimedia container format, and the native file and stream format for the Xiph.org multimedia codecs. As with all Xiph.org technology is it an open format free for anyone to use. http://www.xiph.org/ogg/

gzip -cd libogg-1.1.3.tar.gz | tar xvf -
cd libogg-1.1.3
./configure --prefix=/usr/local/enctools
make ; make install
cd ..

vorbis

Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free, general-purpose compressed audio format http://www.xiph.org/vorbis/

gzip -cd libvorbis-1.2.0.tar.gz | tar xvf -
cd libvorbis-1.2.0
./configure --with-ogg=/usr/local/enctools --prefix=/usr/local/enctools
make ; make install
cd ..

theora

Video codec http://theora.org/

gzip -cd libtheora-1.0beta1.tar.gz | tar xvf -
cd libtheora-1.0beta1
./configure --prefix=/usr/local/enctools --with-ogg=/usr/local/enctools --with-vorbis=/usr/local/enctools
make ; make install
cd ..

x264

x264 - a free h264/avc encoder http://developers.videolan.org/x264.html Download SVN snapshot:

svn co svn://svn.videolan.org/x264/trunk x264

Configure and compile (do not forget about --enable-pthread)

cd x264
./configure --prefix=/usr/local/enctools --enable-shared --enable-pthread
make ; make install
cd ..

xvidcore

XviD is an ISO MPEG-4 compliant video codec, so designed to compress/decompress digital video. It's a open source project, which is developed and maintained by a handful of skilled and interested engineers from all over the world. http://www.xvid.org/

gzip -cd xvidcore-1.1.3.tar.gz | tar xvf -
cd xvidcore-1.1.3
cd build/generic
./configure --prefix=/usr/local/enctools
make ; make install
cd ..

ffmpeg

FFmpeg is a complete solution to record, convert and stream audio and video. It includes libavcodec, the leading audio/video codec library. http://ffmpeg.mplayerhq.hu/

Request a ffmpeg svn snapshot (this moment i have r10593):

svn co svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg

Configuring procedure:

cd ffmpeg

PATH=$PATH:/usr/local/enctools/bin \
./configure          \
--prefix=/usr/local/enctools \
--enable-liba52      \
--enable-libamr_nb   \
--enable-libamr_wb   \
--enable-libfaac     \
--enable-libfaad     \
--enable-libmp3lame  \
--enable-libogg      \
--enable-libvorbis   \
--enable-libtheora   \
--enable-libxvid     \
--enable-libx264     \
--enable-gpl         \
--enable-pp          \
--enable-shared      \
--enable-pthreads    \
--extra-cflags="-I/usr/local/enctools/include" \
--extra-ldflags="-L/usr/local/enctools/lib" 

make ; make install
cd ..

libmad

A high-quality MPEG audio decoder. http://freshmeat.net/projects/libmad/

gzip -cd libmad-0.15.1b.tar.gz | tar xvf -
cd libmad-0.15.1b
./configure --prefix=/usr/local/enctools
make ; make install
cd ..

libmpeg2

libmpeg2 - a free MPEG-2 video stream decoder. http://libmpeg2.sourceforge.net/

gzip -cd mpeg2dec-0.4.1.tar.gz | tar xvf -
cd mpeg2dec-0.4.1
./configure --prefix=/usr/local/enctools
make
make install
cd ..

flac

Free Lossless Audio Codec http://flac.sourceforge.net/

gzip -cd flac-1.2.1.tar.gz | tar xvf -
cd flac-1.2.1
./configure --prefix=/usr/local/enctools --with-ogg=/usr/local/enctools
make ; make install
cd ..

speex

Speex is an Open Source/Free Software patent-free audio compression format designed for speech. The Speex Project aims to lower the barrier of entry for voice applications by providing a free alternative to expensive proprietary speech codecs. Moreover, Speex is well-adapted to Internet applications and provides useful features that are not present in most other codecs. Finally, Speex is part of the GNU Project and is available under the Xiph.org variant of the BSD license. http://speex.org/

gzip -cd speex-1.2beta2.tar.gz | tar xvf -
cd speex-1.2beta2
./configure --prefix=/usr/local/enctools --with-ogg-dir=/usr/local/enctools
make ; make install
cd ..

libdv

Quasar DV Codec: libdv http://libdv.sourceforge.net/

gzip -cd libdv-1.0.0.tar.gz | tar xvf -
cd libdv-1.0.0
./configure --disable-gtk --disable-xv --prefix=/usr/local/enctools
make ; make install
cd ..

libraw1394

The Linux kernel's IEEE 1394 subsystem provides access to the raw 1394 bus through the raw1394 module. http://www.linux1394.org/

gzip -cd libraw1394-1.2.1.tar.gz | tar xvf -
cd libraw1394-1.2.1
./configure --prefix=/usr/local/enctools
make ; make install
cd ..

libavc1394

libavc1394 is a programming interface for the 1394 Trade Association AV/C (Audio/Video Control) Digital Interface Command Set. http://sourceforge.net/projects/libavc1394/

gzip -cd libavc1394-0.5.3.tar.gz | tar xvf -
cd libavc1394-0.5.3
LIBRAW1394_CFLAGS="-I/usr/local/enctools/include/" \
LIBRAW1394_LIBS="-L/usr/local/enctools/lib/ -lraw1394" \
./configure --prefix=/usr/local/enctools
make ; make install
cd ..


live555

LIVE555 Streaming Media (rtsp, rtp support) http://live555.com/liveMedia/

gzip -cd live.2007.08.03a.tar.gz | tar xf -
cd live
./genMakefiles linux
make 
cd ..

folder live - it will be used by VLC in next step

VLC

VLC - the cross-platform media player and streaming server. http://www.videolan.org/vlc/

to avoid "error: redefinition of typedef ‘byte_t’", fix file /usr/local/enctools/include/libraw1394/raw1394.h, comment out line 43:

--skipped--
/* typedef u_int8_t  byte_t; */
--skipped--
bzip2 -cd vlc-0.8.6c.tar.bz2 | tar xvf -
cd vlc-0.8.6c

Building procedure:

CPPFLAGS="-I/usr/local/enctools/include/"; export CPPFLAGS
CFLAGS="-I/usr/local/enctools/include/"; export CFLAGS
LDFLAGS="-L/usr/local/enctools/lib/"; export LDFLAGS
PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/local/enctools/lib/pkgconfig ; export PKG_CONFIG_PATH
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/enctools/lib ; export LD_LIBRARY_PATH

./configure  \
--prefix=/usr/local/enctools \
--enable-dv \
--enable-live555 --with-live555-tree=../live \
--enable-v4l \
--enable-ogg --enable-mad --enable-faad --enable-a52 --enable-flac \
--enable-libmpeg2 --enable-vorbis --enable-speex --enable-theora \
--enable-png --enable-x264 \
--enable-ffmpeg --with-ffmpeg-mp3lame --with-ffmpeg-faac \
--with-ffmpeg-vorbis --with-ffmpeg-theora --with-ffmpeg-ogg \
--disable-wxwidgets --disable-skins2

make ; make install

cd ..


twolame

TwoLAME is an optimised MPEG Audio Layer 2 (MP2) encoder based on tooLAME by Mike Cheng, which in turn is based upon the ISO dist10 code and portions of LAME. http://www.twolame.org/

gzip -cd twolame-0.3.10.tar.gz | tar xf -
cd twolame-0.3.10
./configure --prefix=/usr/local/enctools
make ; make install
cd ..

MPEG4IP

MPEG4IP: Open Source, Open Standards, Open Streaming. http://www.mpeg4ip.net/

Request sources from CVS

cvs -d:pserver:anonymous@mpeg4ip.cvs.sourceforge.net:/cvsroot/mpeg4ip login
cvs -z3 -d:pserver:anonymous@mpeg4ip.cvs.sourceforge.net:/cvsroot/mpeg4ip co -P mpeg4ip

Configuring procedure:

CPPFLAGS="-I/usr/local/enctools/include/"; export CPPFLAGS
CFLAGS="-I/usr/local/enctools/include/"; export CFLAGS
LDFLAGS="-L/usr/local/enctools/lib/"; export LDFLAGS

cd mpeg4ip

./bootstrap                   \
--prefix=/usr/local/enctools  \
--enable-ffmpeg               \
--enable-mp4live              \
--enable-player               \
--enable-server               \
--enable-igmpv3               \
--disable-id3tags

After configuring mpeg4ip reports:
Mp4live encoder report:
    ffmpeg encoder is installed
    xvid encoder is installed
    x264 encoder is installed
    lame encoder is installed
    faac encoder is installed
    twolame encoder is installed

Build mpeg4ip:

make ; make install; cd .. 

Built binaries

Personal tools