AP FC8

From M1Research

(Difference between revisions)
Jump to: navigation, search
(FireWall)
(configuration)
 
(9 intermediate revisions not shown)
Line 19: Line 19:
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=2 PME-
                 Status: D0 PME-Enable- DSel=0 DScale=2 PME-
 +
        Kernel driver in use: ath_pci
 +
        Kernel modules: ath_pci
 +
--skipped--
 +
[root@dev-1 var]# lspci -vn
 +
--skipped--
 +
01:0b.0 0200: 168c:0013 (rev 01)
 +
        Subsystem: 1186:3a73
 +
        Flags: bus master, medium devsel, latency 168, IRQ 23
 +
        Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
 +
        Capabilities: [44] Power Management version 2
         Kernel driver in use: ath_pci
         Kernel driver in use: ath_pci
         Kernel modules: ath_pci
         Kernel modules: ath_pci
Line 106: Line 116:
=Network services configuration=
=Network services configuration=
==DHCP==
==DHCP==
-
<code>/etc/dhcpd.conf</code>:<pre>ddns-update-style interim;
+
<code>/etc/dhcpd.conf</code>:<pre>ddns-updates on;
 +
ddns-update-style interim;
 +
ddns-domainname "home-home";
 +
ddns-rev-domainname "in-addr.arpa";
ignore client-updates;
ignore client-updates;
 +
include "/etc/rndc.key";
-
subnet 192.168.1.0 netmask 255.255.255.0 {
+
subnet 192.168.1.0 netmask 255.255.255.0
 +
{
 +
    option routers              192.168.1.1;
 +
    option subnet-mask          255.255.255.0;
-
# --- default gateway
+
    option nis-domain          "home-home";
-
        option routers                  192.168.1.1;
+
    option domain-name          "home-home";
-
        option subnet-mask              255.255.255.0;
+
    option domain-name-servers  192.168.1.1;
-
        option nis-domain              "domain.org";
+
    option ntp-servers          192.168.1.1;
-
        option domain-name              "domain.org";
+
    option netbios-name-servers 192.168.1.1;
-
        option domain-name-servers     192.168.1.1;
+
-
        option time-offset              -18000; # Eastern Standard Time
+
    range dynamic-bootp 192.168.1.128 192.168.1.254;
-
#      option ntp-servers              192.168.1.1;
+
    default-lease-time 21600;
-
#      option netbios-name-servers    192.168.1.1;
+
    max-lease-time 43200;
-
# --- Selects point-to-point node (default is hybrid). Don't change this unless
+
-
# -- you understand Netbios very well
+
-
#      option netbios-node-type 2;
+
-
        range dynamic-bootp 192.168.1.128 192.168.1.254;
+
    zone home-home. {
-
         default-lease-time 21600;
+
        primary 127.0.0.1;
-
         max-lease-time 43200;
+
        key "rndckey";
 +
    }
 +
 
 +
    zone 1.168.192.in-addr.arpa. {
 +
         primary 127.0.0.1;
 +
         key "rndckey";
 +
    }
-
        # we want the nameserver to appear at a fixed address
 
-
        host ns {
 
-
                next-server marvin.redhat.com;
 
-
                hardware ethernet 12:34:56:78:AB:CD;
 
-
                fixed-address 207.175.42.254;
 
-
        }
 
}</pre>
}</pre>
==DNS==
==DNS==
<code>/etc/named.conf</code>:<pre>options {
<code>/etc/named.conf</code>:<pre>options {
-
//      listen-on port 53 { 127.0.0.1; };
 
         listen-on-v6 port 53 { ::1; };
         listen-on-v6 port 53 { ::1; };
         directory      "/var/named";
         directory      "/var/named";
Line 160: Line 172:
         type hint;
         type hint;
         file "named.ca";
         file "named.ca";
 +
};
 +
 +
include "/etc/rndc.key";
 +
 +
zone "home-home" {
 +
    type master;
 +
    allow-update { key rndckey; };
 +
    file "slaves/home-home.zone";
 +
};
 +
 +
zone "1.168.192.in-addr.arpa" {
 +
    type master;
 +
    allow-update { key rndckey; };
 +
    file "slaves/1.168.192.in-addr.arpa.zone";
};
};
include "/etc/named.rfc1912.zones";</pre>
include "/etc/named.rfc1912.zones";</pre>
-
==FireWall==
+
<code>/var/named/chroot/var/named/slaves/home-home.zone</code>:<pre>@ in soa localhost. root 1 3H 15M 1W 1D
 +
  ns localhost.
 +
</pre>
 +
 
 +
<code>/var/named/chroot/var/named/slaves/1.168.192.in-addr.arpa.zone</code>:<pre>@ in soa localhost. root 1 3H 15M 1W 1D
 +
  ns localhost.
 +
</pre>
 +
 
 +
Change attribute to zone files:<pre>[root@dev-1 slaves]# chown named.named /var/named/chroot/var/named/slaves/*
 +
[root@dev-1 slaves]# chmod 660 /var/named/chroot/var/named/slaves/*</pre>
 +
 
 +
==Firewall (iptables)==
<code>/etc/sysconfig/iptables</code>:<pre>*nat
<code>/etc/sysconfig/iptables</code>:<pre>*nat
-A POSTROUTING -o eth0 -j MASQUERADE
-A POSTROUTING -o eth0 -j MASQUERADE
Line 243: Line 280:
wpa_psk_file=/etc/hostapd/wpa_psk
wpa_psk_file=/etc/hostapd/wpa_psk
wpa_key_mgmt=WPA-PSK
wpa_key_mgmt=WPA-PSK
-
wpa_pairwise=CCMP</code>
+
wpa_pairwise=CCMP</pre>
Please note: <code>ssid=home-home</code> should define the same SSID as you defined during interface configuration, <code>wpa_pairwise=CCMP</code> mean that AES used for key management.
Please note: <code>ssid=home-home</code> should define the same SSID as you defined during interface configuration, <code>wpa_pairwise=CCMP</code> mean that AES used for key management.
Line 274: Line 311:
After system starts login and check:
After system starts login and check:
-
* WiFi driver loaded correctly:<pre></pre>
+
*WiFi driver loaded correctly:
-
* hostapd started
+
<pre>
 +
Jul 12 13:18:05 dev-1 kernel: ath_hal: module license 'Proprietary' taints kernel.
 +
Jul 12 13:18:05 dev-1 kernel: ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
 +
Jul 12 13:18:05 dev-1 kernel: wlan: 0.9.4
 +
Jul 12 13:18:05 dev-1 kernel: ath_pci: 0.9.4
 +
Jul 12 13:18:05 dev-1 kernel: ath_rate_sample: 1.2 (0.9.4)
 +
Jul 12 13:18:05 dev-1 kernel: wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 +
Jul 12 13:18:05 dev-1 kernel: wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54
 +
Jul 12 13:18:05 dev-1 kernel: wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
 +
Jul 12 13:18:05 dev-1 kernel: wifi0: H/W encryption support: WEP AES AES_CCM TKIP
 +
Jul 12 13:18:05 dev-1 kernel: wifi0: mac 7.9 phy 4.5 radio 5.6
 +
Jul 12 13:18:05 dev-1 kernel: wifi0: Use hw queue 1 for WME_AC_BE traffic
 +
Jul 12 13:18:05 dev-1 kernel: wifi0: Use hw queue 0 for WME_AC_BK traffic
 +
Jul 12 13:18:05 dev-1 kernel: wifi0: Use hw queue 2 for WME_AC_VI traffic
 +
Jul 12 13:18:05 dev-1 kernel: wifi0: Use hw queue 3 for WME_AC_VO traffic
 +
Jul 12 13:18:05 dev-1 kernel: wifi0: Use hw queue 8 for CAB traffic
 +
Jul 12 13:18:05 dev-1 kernel: wifi0: Use hw queue 9 for beacons
 +
Jul 12 13:18:05 dev-1 kernel: wifi0: Atheros 5212: mem=0xff8f0000, irq=23
 +
</pre>
 +
*hostapd started:
 +
<pre>
 +
[root@dev-1 ~]# ps -ax | grep host
 +
Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.7/FAQ
 +
1913 ?        Ss    0:00 /usr/local/bin/hostapd -B /etc/hostapd/hostapd.conf
 +
2252 pts/1    R+    0:00 grep host
 +
[root@dev-1 ~]#
 +
</pre>
 +
 
 +
Try to connect from another pc throw WiFi to AP <i>home-home</i> with listed above credentials. On success you will see in the logs:<pre>Jul 12 14:59:41 dev-1 hostapd: wlan0: STA 00:19:cb:74:d7:74 IEEE 802.11: associated
 +
Jul 12 14:59:41 dev-1 hostapd: wlan0: STA 00:19:cb:74:d7:74 WPA: pairwise key handshake completed (WPA)
 +
Jul 12 14:59:42 dev-1 dhcpd: DHCPDISCOVER from 00:19:cb:74:d7:74 via br0
 +
Jul 12 14:59:42 dev-1 hostapd: wlan0: STA 00:19:cb:74:d7:74 WPA: group key handshake completed (WPA)
 +
Jul 12 14:59:43 dev-1 dhcpd: DHCPOFFER on 192.168.1.254 to 00:19:cb:74:d7:74 (bm) via br0
 +
Jul 12 14:59:43 dev-1 named[2838]: client 127.0.0.1#53752: updating zone 'home-home/IN': update unsuccessful: bm.home-home: 'name not in use' prerequisite not satisfied (YXDOMAIN)
 +
Jul 12 14:59:43 dev-1 named[2838]: client 127.0.0.1#45106: signer "rndckey" approved
 +
Jul 12 14:59:43 dev-1 named[2838]: client 127.0.0.1#45106: updating zone 'home-home/IN': deleting rrset at 'bm.home-home' A
 +
Jul 12 14:59:43 dev-1 named[2838]: client 127.0.0.1#45106: updating zone 'home-home/IN': adding an RR at 'bm.home-home' A
 +
Jul 12 14:59:43 dev-1 dhcpd: Added new forward map from bm.home-home to 192.168.1.254
 +
Jul 12 14:59:43 dev-1 named[2838]: client 127.0.0.1#46822: signer "rndckey" approved
 +
Jul 12 14:59:43 dev-1 named[2838]: client 127.0.0.1#46822: updating zone '1.168.192.in-addr.arpa/IN': deleting rrset at '254.1.168.192.in-addr.arpa' PTR
 +
Jul 12 14:59:43 dev-1 named[2838]: client 127.0.0.1#46822: updating zone '1.168.192.in-addr.arpa/IN': adding an RR at '254.1.168.192.in-addr.arpa' PTR
 +
Jul 12 14:59:43 dev-1 dhcpd: added reverse map from 254.1.168.192.in-addr.arpa to bm.home-home
 +
Jul 12 14:59:43 dev-1 dhcpd: DHCPREQUEST for 192.168.1.254 (192.168.1.1) from 00:19:cb:74:d7:74 (bm) via br0
 +
Jul 12 14:59:43 dev-1 dhcpd: DHCPACK on 192.168.1.254 to 00:19:cb:74:d7:74 (bm) via br0
 +
Jul 12 14:59:45 dev-1 named[2838]: unexpected RCODE (15) resolving 'NS.SECONDARY.NET.UA/AAAA/IN': 195.47.253.1#53
 +
Jul 12 14:59:48 dev-1 dhcpd: DHCPREQUEST for 192.168.1.254 from 00:19:cb:74:d7:74 (bm) via br0
 +
Jul 12 14:59:48 dev-1 dhcpd: DHCPACK on 192.168.1.254 to 00:19:cb:74:d7:74 (bm) via br0
 +
</pre>
-
Try to connect from another pc throw WiFi to AP <i>home-home</i> with listed above credentials.
+
As seen from this log, <b>hostapd</b> successfully authorize client, DHCP service leased an address and registered in DNS forward and reverse name resolving map.

Latest revision as of 16:22, 12 July 2008

Contents

WiFi Hardware

As we are going build WPA protected Access Point it's required authorization daemon supports our hardware. Authorization software based on hostapd. As seen from hostapd's home page it support chipsets/drivers:

  • Host AP driver for Prism2/2.5/3
  • madwifi (Atheros ar521x)
  • Prism54.org (Prism GT/Duette/Indigo)

After some research on our local PC components market we choose D-link DWA-520 that is Atheros chipset based:

[root@dev-1 ~]# lspci -vvv
--skipped--
01:0b.0 Ethernet controller: Atheros Communications, Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor (rev 01)
        Subsystem: D-Link System Inc Unknown device 3a73
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-
        Kernel driver in use: ath_pci
        Kernel modules: ath_pci
--skipped--
[root@dev-1 var]# lspci -vn
--skipped--
01:0b.0 0200: 168c:0013 (rev 01)
        Subsystem: 1186:3a73
        Flags: bus master, medium devsel, latency 168, IRQ 23
        Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [44] Power Management version 2
        Kernel driver in use: ath_pci
        Kernel modules: ath_pci
--skipped--

and supported by madwifi drivers.

Generic Installation

Generic installation steps:

  • install WiFi pci board
  • install additional ethernet adapter (we want 2 adapters: 1st WAN, 2nd LOCAL LAN)
  • install minimal Fedora Core 8 installation
  • update all installed Fedora packeges
  • install required packages for building madwifi drivers and hostapd:
    • gcc
    • openssl-devel
    • kernel package development (in my case kernel-devel-2.6.25.9-40.fc8)
    • dhcp
    • bind, bind-chroot
    • bridge-utils
  • download to /usr/local/src madwifi driver and hostapd source code:
    • madwifi-0.9.4.tar.gz
    • hostapd-0.6.3.tar.gz

Building/configuring driver

Unpack madwifi-0.9.4.tar.gz to /usr/local/src:

[root@dev-1 ~]# cd /usr/local/src
[root@dev-1 src]# gzip -cd madwifi-0.9.4.tar.gz | tar xf -
Goto source code directory, build and install:
[root@dev-1 src]# cd madwifi-0.9.4
[root@dev-1 madwifi-0.9.4]# make
Checking requirements... ok.
Checking kernel configuration... ok.
make -C /lib/modules/2.6.25.9-40.fc8/build SUBDIRS=/usr/local/src/madwifi-0.9.4 modules
make[1]: Entering directory `/usr/src/kernels/2.6.25.9-40.fc8-i686'
  CC [M]  /usr/local/src/madwifi-0.9.4/ath/if_ath.o
--skipped--
gcc -o ath_info -g -O2 -Wall ath_info.c
make[1]: Leaving directory `/usr/local/src/madwifi-0.9.4/tools'
[root@dev-1 madwifi-0.9.4]# make install
Remove old ath5k driver:
[root@dev-1 madwifi-0.9.4]# rm -f -r -d /lib/modules/2.6.25.9-40.fc8/kernel/drivers/net/wireless/ath5k
[root@dev-1 madwifi-0.9.4]# depmod -a
Check /etc/modprobe.conf contains correct options for new driver and wlan0 associated with ath_pci driver:
alias eth0 e100
alias eth0 eth1
#alias wlan0 ath5k
alias wlan0 ath_pci
options ath_pci autocreate=ap
alias scsi_hostadapter libata
alias scsi_hostadapter1 ata_piix

Network configuration

Setup ethernet adaptor eth0 for WAN interface and bridge (eth1 + wlan0) for local network.

/etc/sysconfig/network-scripts/ifcfg-br0
DEVICE=br0
TYPE=Bridge
BOOTPROTO=static
IPADDR=192.168.1.1
NETMASK=255.255.255.0
ONBOOT=yes
DELAY=0
STP=off
/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
BROADCAST=10.1.255.255
IPADDR=10.1.5.190
NETMASK=255.255.0.0
NETWORK=10.1.0.0
ONBOOT=yes
/etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
TYPE=ETHER
BRIDGE=br0
ONBOOT=yes
/etc/sysconfig/network-scripts/ifcfg-wlan0
DEVICE=wlan0
BRIDGE=br0
ONBOOT=yes
MODE=master
ESSID="home-home"

Please note that our AP network ESSID we setted to home-home.

Network services configuration

DHCP

/etc/dhcpd.conf:
ddns-updates on;
ddns-update-style interim;
ddns-domainname "home-home";
ddns-rev-domainname "in-addr.arpa";
ignore client-updates;
include "/etc/rndc.key";

subnet 192.168.1.0 netmask 255.255.255.0
{
    option routers              192.168.1.1;
    option subnet-mask          255.255.255.0;

    option nis-domain           "home-home";
    option domain-name          "home-home";
    option domain-name-servers  192.168.1.1;

    option ntp-servers          192.168.1.1;
    option netbios-name-servers 192.168.1.1;

    range dynamic-bootp 192.168.1.128 192.168.1.254;
    default-lease-time 21600;
    max-lease-time 43200;

    zone home-home. {
        primary 127.0.0.1;
        key "rndckey";
    }

    zone 1.168.192.in-addr.arpa. {
        primary 127.0.0.1;
        key "rndckey";
    }

}

DNS

/etc/named.conf:
options {
        listen-on-v6 port 53 { ::1; };
        directory       "/var/named";
        dump-file       "/var/named/data/cache_dump.db";
        statistics-file "/var/named/data/named_stats.txt";
        memstatistics-file "/var/named/data/named_mem_stats.txt";
        allow-query     { any; };
        recursion yes;
};

logging {
        channel default_debug {
                file "data/named.run";
                severity dynamic;
        };
};

zone "." IN {
        type hint;
        file "named.ca";
};

include "/etc/rndc.key";

zone "home-home" {
    type master;
    allow-update { key rndckey; };
    file "slaves/home-home.zone";
};

zone "1.168.192.in-addr.arpa" {
    type master;
    allow-update { key rndckey; };
    file "slaves/1.168.192.in-addr.arpa.zone";
};

include "/etc/named.rfc1912.zones";
/var/named/chroot/var/named/slaves/home-home.zone:
@ in soa localhost. root 1 3H 15M 1W 1D
  ns localhost.
/var/named/chroot/var/named/slaves/1.168.192.in-addr.arpa.zone:
@ in soa localhost. root 1 3H 15M 1W 1D
  ns localhost.
Change attribute to zone files:
[root@dev-1 slaves]# chown named.named /var/named/chroot/var/named/slaves/*
[root@dev-1 slaves]# chmod 660 /var/named/chroot/var/named/slaves/*

Firewall (iptables)

/etc/sysconfig/iptables:
*nat
-A POSTROUTING -o eth0 -j MASQUERADE
-A POSTROUTING -o ppp0 -j MASQUERADE
COMMIT

*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:RH-Firewall-1-INPUT - [0:0]
-A FORWARD -i br0 -j ACCEPT
-A INPUT -i br0 -j ACCEPT
-A INPUT -i eth1 -j ACCEPT
-A INPUT -i wlan0 -j ACCEPT
-A INPUT -j RH-Firewall-1-INPUT
-A FORWARD -j RH-Firewall-1-INPUT
-A RH-Firewall-1-INPUT -i lo -j ACCEPT
-A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT
-A RH-Firewall-1-INPUT -p 50 -j ACCEPT
-A RH-Firewall-1-INPUT -p 51 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22  -j ACCEPT
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
COMMIT
/etc/sysctl.conf:
--skipped--
# Controls IP packet forwarding
net.ipv4.ip_forward = 1
--skipped--

hostapd

building

Unpack source code to /usr/local/src direcory and goto direcotry:
[root@dev-1 src]# gzip -cd hostapd-0.6.3.tar.gz | tar xf -
[root@dev-1 src]# cd hostapd-0.6.3
[root@dev-1 hostapd-0.6.3]# cd hostapd
[root@dev-1 hostapd]#
Copy build config template file to appropriate name:
[root@dev-1 hostapd]# cp defconfig .config
Modify config file .config in such way (this is diff file):
--- defconfig   2008-02-23 04:45:24.000000000 +0200
+++ .config     2008-07-12 12:55:53.000000000 +0300
@@ -9,6 +9,9 @@
 # be modified from here. In most cass, these lines should use += in order not
 # to override previous values of the variables.

+CONFIG_DRIVER_MADWIFI=y
+CFLAGS += -I/usr/local/src/madwifi-0.9.4
+
 # Driver interface for Host AP driver
 CONFIG_DRIVER_HOSTAP=y</code>

Make and install:<pre>[root@dev-1 hostapd]# make
[root@dev-1 hostapd]# make install

configuration

Create directory /etc/hostapd

Create file /etc/hostapd/hostapd.conf:
interface=wlan0
bridge=br0
driver=madwifi
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
debug=0
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=home-home
auth_algs=3
eapol_key_index_workaround=0
eap_server=0
wpa=3
wpa_psk_file=/etc/hostapd/wpa_psk
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP

Please note: ssid=home-home should define the same SSID as you defined during interface configuration, wpa_pairwise=CCMP mean that AES used for key management.

Create file /etc/hostapd/wpa_psk:
00:00:00:00:00:00 PRIVETPRIVETPRIVETPRIVETPRIVETPRIVETPRIVETPRIVETPRIVETPRIVET!!!

where:

  • 00:00:00:00:00:00 mean that any MAC address accepted
  • PRIVETPRIVET... is passphrase.
Original hostapd.wpa_psk says:
# List of WPA PSKs. Each line, except for empty lines and lines starting
# with #, must contain a MAC address and PSK separated with a space.
# Special MAC address 00:00:00:00:00:00 can be used to configure PSKs that
# anyone can use. PSK can be configured as an ASCII passphrase of 8..63
# characters or as a 256-bit hex PSK (64 hex digits).
00:00:00:00:00:00 secret passphrase
00:11:22:33:44:55 another passphrase
00:22:33:44:55:66 0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
00:00:00:00:00:00 another passphrase for all STAs
Set correct permissions to key file /etc/hostapd/wpa_psk:
[root@dev-1 hostapd]# chmod 600 /etc/wpa_psk
Modify /etc/rc.d/rc.local to enable hostapd daemon startup:
--skipped--
# run hostap daemon
/usr/local/bin/hostapd -B /etc/hostapd/hostapd.conf
--skipped--

Testing

Now you may reboot pc.

After system starts login and check:

  • WiFi driver loaded correctly:
Jul 12 13:18:05 dev-1 kernel: ath_hal: module license 'Proprietary' taints kernel.
Jul 12 13:18:05 dev-1 kernel: ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
Jul 12 13:18:05 dev-1 kernel: wlan: 0.9.4
Jul 12 13:18:05 dev-1 kernel: ath_pci: 0.9.4
Jul 12 13:18:05 dev-1 kernel: ath_rate_sample: 1.2 (0.9.4)
Jul 12 13:18:05 dev-1 kernel: wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
Jul 12 13:18:05 dev-1 kernel: wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54
Jul 12 13:18:05 dev-1 kernel: wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Jul 12 13:18:05 dev-1 kernel: wifi0: H/W encryption support: WEP AES AES_CCM TKIP
Jul 12 13:18:05 dev-1 kernel: wifi0: mac 7.9 phy 4.5 radio 5.6
Jul 12 13:18:05 dev-1 kernel: wifi0: Use hw queue 1 for WME_AC_BE traffic
Jul 12 13:18:05 dev-1 kernel: wifi0: Use hw queue 0 for WME_AC_BK traffic
Jul 12 13:18:05 dev-1 kernel: wifi0: Use hw queue 2 for WME_AC_VI traffic
Jul 12 13:18:05 dev-1 kernel: wifi0: Use hw queue 3 for WME_AC_VO traffic
Jul 12 13:18:05 dev-1 kernel: wifi0: Use hw queue 8 for CAB traffic
Jul 12 13:18:05 dev-1 kernel: wifi0: Use hw queue 9 for beacons
Jul 12 13:18:05 dev-1 kernel: wifi0: Atheros 5212: mem=0xff8f0000, irq=23
  • hostapd started:
[root@dev-1 ~]# ps -ax | grep host
Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.7/FAQ
 1913 ?        Ss     0:00 /usr/local/bin/hostapd -B /etc/hostapd/hostapd.conf
 2252 pts/1    R+     0:00 grep host
[root@dev-1 ~]#
Try to connect from another pc throw WiFi to AP home-home with listed above credentials. On success you will see in the logs:
Jul 12 14:59:41 dev-1 hostapd: wlan0: STA 00:19:cb:74:d7:74 IEEE 802.11: associated
Jul 12 14:59:41 dev-1 hostapd: wlan0: STA 00:19:cb:74:d7:74 WPA: pairwise key handshake completed (WPA)
Jul 12 14:59:42 dev-1 dhcpd: DHCPDISCOVER from 00:19:cb:74:d7:74 via br0
Jul 12 14:59:42 dev-1 hostapd: wlan0: STA 00:19:cb:74:d7:74 WPA: group key handshake completed (WPA)
Jul 12 14:59:43 dev-1 dhcpd: DHCPOFFER on 192.168.1.254 to 00:19:cb:74:d7:74 (bm) via br0
Jul 12 14:59:43 dev-1 named[2838]: client 127.0.0.1#53752: updating zone 'home-home/IN': update unsuccessful: bm.home-home: 'name not in use' prerequisite not satisfied (YXDOMAIN)
Jul 12 14:59:43 dev-1 named[2838]: client 127.0.0.1#45106: signer "rndckey" approved
Jul 12 14:59:43 dev-1 named[2838]: client 127.0.0.1#45106: updating zone 'home-home/IN': deleting rrset at 'bm.home-home' A
Jul 12 14:59:43 dev-1 named[2838]: client 127.0.0.1#45106: updating zone 'home-home/IN': adding an RR at 'bm.home-home' A
Jul 12 14:59:43 dev-1 dhcpd: Added new forward map from bm.home-home to 192.168.1.254
Jul 12 14:59:43 dev-1 named[2838]: client 127.0.0.1#46822: signer "rndckey" approved
Jul 12 14:59:43 dev-1 named[2838]: client 127.0.0.1#46822: updating zone '1.168.192.in-addr.arpa/IN': deleting rrset at '254.1.168.192.in-addr.arpa' PTR
Jul 12 14:59:43 dev-1 named[2838]: client 127.0.0.1#46822: updating zone '1.168.192.in-addr.arpa/IN': adding an RR at '254.1.168.192.in-addr.arpa' PTR
Jul 12 14:59:43 dev-1 dhcpd: added reverse map from 254.1.168.192.in-addr.arpa to bm.home-home
Jul 12 14:59:43 dev-1 dhcpd: DHCPREQUEST for 192.168.1.254 (192.168.1.1) from 00:19:cb:74:d7:74 (bm) via br0
Jul 12 14:59:43 dev-1 dhcpd: DHCPACK on 192.168.1.254 to 00:19:cb:74:d7:74 (bm) via br0
Jul 12 14:59:45 dev-1 named[2838]: unexpected RCODE (15) resolving 'NS.SECONDARY.NET.UA/AAAA/IN': 195.47.253.1#53
Jul 12 14:59:48 dev-1 dhcpd: DHCPREQUEST for 192.168.1.254 from 00:19:cb:74:d7:74 (bm) via br0
Jul 12 14:59:48 dev-1 dhcpd: DHCPACK on 192.168.1.254 to 00:19:cb:74:d7:74 (bm) via br0

As seen from this log, hostapd successfully authorize client, DHCP service leased an address and registered in DNS forward and reverse name resolving map.

Personal tools