-Miracle Test Procedure
+Melted Test Procedure
-Copyright (C) 2003 Ushodaya Enterprised Limited
+Copyright (C) 2003-2009 Ushodaya Enterprised Limited
Author: Dan Dennedy <dan@dennedy.org>
-Last Revision: 2004-03-20
+Last Revision: 2009-05-15
-NOTE: THIS DOCUMENT REQUIRES REVISION TO NEW, EXPECTED BEHAVIOR FROM MIRACLE.
+NOTE: THIS DOCUMENT REQUIRES REVISION TO NEW, EXPECTED BEHAVIOR FROM MELTED.
Tests are divided into 9 sections:
beginning (but you can of course employ common sense in this situation).
Before starting the final tests, please delete/backup your current
-/etc/dv139d.conf file. This (more or less) ensures that tests are carried out
+/etc/melted.conf file. This (more or less) ensures that tests are carried out
for a virgin install.
Run these from the top level project directory
-1.1.0 Start miracle in interactive mode: src/miracle/miracle -test
---> miracle starts interactively and reports:
+1.1.0 Start melted in interactive mode: src/melted/melted -test
+--> melted starts interactively and reports:
(5) Starting server on 5250.
-(5) miracle version 0.0.1 listening on port 5250
+(5) melted version 0.0.1 listening on port 5250
1.1.1 Stop the server by pressing Ctrl-C
---> miracle returns the following and returns control to the console:
-(5) miracle version 0.0.1 server terminated.
+--> melted returns the following and returns control to the console:
+(5) melted version 0.0.1 server terminated.
-1.2.2 Start miracle as a daemon: src/miracle/miracle
+1.2.2 Start melted as a daemon: src/melted/melted
--> control returns to the console
-1.2.3 Verify miracle is running: ps ax
---> several miracle processes are running
+1.2.3 Verify melted is running: ps ax
+--> several melted processes are running
-1.2.4 Verify successful miracle startup using syslog: sudo tail /var/log/syslog
---> miracle: miracle version 0.0.1 listening on port 5250
+1.2.4 Verify successful melted startup using syslog: sudo tail /var/log/syslog
+--> melted: melted version 0.0.1 listening on port 5250
1.2.5 Verify connectivity on port 5250: telnet localhost 5250
--> 100 VTR Ready
1.2.6 Test clean disconnect: BYE
--> Connection closed by foreign host.
-1.2.7 Stop the daemon: killall miracle
+1.2.7 Stop the daemon: killall melted
--> no errors
1.2.8 Verify a clean server shutdown: sudo tail /var/log/syslog
---> miracle: shutdown complete.
+--> melted: shutdown complete.
-1.3.0 Start miracle on a different port: src/miracle/miracle -port 5260
+1.3.0 Start melted on a different port: src/melted/melted -port 5260
-1.3.1 Verify successful miracle startup using syslog: sudo tail /var/log/syslog
---> miracle: miracle version 0.0.1 listening on port 5260
+1.3.1 Verify successful melted startup using syslog: sudo tail /var/log/syslog
+--> melted: melted version 0.0.1 listening on port 5260
1.3.2 Verify connectivity on port 5260: telnet localhost 5260
--> 100 VTR Ready
1.3.3 Test clean disconnect: BYE
--> Connection closed by foreign host.
-1.3.4 Stop the daemon: killall miracle
+1.3.4 Stop the daemon: killall melted
--> no errors
2. Unit Management
------------------
-Start the miracle server and connect to it with telnet or a protocol-
-level client (albino).
+Start the melted server and connect to it with telnet or a protocol-
+level client (mvcp-client).
-2.1 List the AV/C devices on the bus: NLS
+2.1 List the playout devices on the host: NLS
--> 201 OK
---> one or more lines listing devices with GUID in second column
+--> one or more lines listing devices with an ID in second column
-2.2 Add a device as a miracle unit: UADD {sdl, bluefish}:{NTSC, PAL}
+2.2 Add a device as a melted unit: UADD {sdl, bluefish}
--> 201 OK
--> U0
--> U0 ?? {sdl, bluefish} 1
--> It is important that the last column is '1' to indicate it is online.
-2.4 Add an offline unit by using some bogus GUID value: UADD foo
+2.4 List the units: ULS
--> 201 OK
---> U1
-
-2.3 List the units: ULS
---> 201 OK
---> U0 ?? {GUID} 1
---> U1 00 0000000f00055c1 0
---> It is important that the last column of the last row is '0' to
- indicate offline.
+--> U0 ?? {sdl, bluefish} 1
-2.4 Attempt unit commands for a unit that does not exist: LOAD U6 foo
+2.5 Attempt unit commands for a unit that does not exist: LOAD U6 foo
--> 403 Unit not found
-2.5 Attempt unit commands without specifying a unit: PLAY
+2.6 Attempt unit commands without specifying a unit: PLAY
--> 402 Argument missing
-2.6 Attempt unit commands for a unit that is offline: PLAY U1
---> 403 Unit not found
+2.7 Attempt unit commands for a unit: PLAY U0
+--> 200 OK
-2.7.0 Load a clip into an offline unit: LOAD U1 test.dv
+2.8.0 Load a clip into an unit: LOAD U0 test.dv
--> 200 OK
-2.7.1 Verify the status of the offline unit: USTA U1
+2.7.1 Verify the status of the unit: USTA U0
--> 202 OK
---> 1 offline "test.dv" 0 1000 25.00 0 ...
+--> 0 online "test.dv" 0 1000 25.00 0 ...
--> only the first 3 columns are relevant in this test
-2.9 Set the property of an online unit: USET U0 points=use
---> 200 OK
-
-2.8 Set the property of an offline unit: USET U1 points=ignore
---> 200 OK
-
3. Server Configuration
-----------------------
-Start miracle if not already started from a previous test.
+Start melted if not already started from a previous test.
3.1 Get the hard-coded default root property value: GET root
--> 202 OK
4. Simple Playback
-------------------
-Start miracle or restart if already started.
+Start melted or restart if already started.
Add an online unit.
Set the server root property if desired.
5. Multi-unit Playback
-----------------------
-Start miracle or restart if already started.
+Start melted or restart if already started.
Add *2* online units.
Set the server root property if desired.
6. Advanced Playback
--------------------
-Start miracle or restart if already started.
+Start melted or restart if already started.
Add *2* online units.
Set the server root property if desired.
7. Unit Configuration
---------------------
-Start miracle or restart if already started.
+Start melted or restart if already started.
Add an online unit.
Set the server root property if desired.
number of dv files are available for use in the servers ROOT directory - this
document assumes that they are named test001.dv and up.
-9.1.0 Start miracle in interactive mode and add a unit (all tests will assume U0)
+9.1.0 Start melted in interactive mode and add a unit (all tests will assume U0)
--> server started with unit 0 available
-9.1.1 Obtain a miracle shell (via telnet or albino).
+9.1.1 Obtain a melted shell (via telnet or mvcp-client).
--> 100 VTR (if reported by the client)
9.1.2 Load a clip with LOAD U0 test001.dv and PAUSE U0
projects / melted / blobdiff